Check the appearance quality
The appearance of marble slabs of different grades is different. Because marble is naturally formed, defects are inevitable. At the same time, the quality of processing equipment and measuring tools is also the cause of slab defects. Some slabs are not full (warping or concave), the slabs have defects (cracks, sand holes, color spots, etc.), and the specifications of the slabs are different (such as missing edges and corners, irregular slabs), etc. According to national standards, marble slabs of all grades are allowed to have certain defects, but the superior products are not so obvious.
Choose the color tone of the pattern
Marble slabs are colorful, with various tones and no identical patterns, which is the charm of the precious marble slabs. The basic consistency of color tone, small color difference and beautiful pattern are the specific manifestations of excellent varieties, otherwise it will seriously affect the decorative effect.
Detect the surface gloss
The surface gloss of marble slabs will greatly affect the decorative effect. Generally speaking, the polished surface of high-quality marble slabs should have a mirror-like gloss, which can clearly reflect the scenery. However, due to the different chemical composition of marbles of different qualities, even products of the same grade will have a large difference in gloss. Of course, the surface gloss of the plates of different grades of the same material will also have certain differences. In addition, the strength and water absorption rate of marble plates are also important indicators for evaluating the quality of marble.
Home Inspection
Common Test 1: Drop a drop of ink on the back of the stone. If the ink quickly disperses and seeps everywhere, it means that the internal particles of the stone are loose and the quality is poor; but if the ink drop does not penetrate, it means that the stone is dense and the quality is good.
This is actually a simple test of the water absorption rate of the stone. If the ink drop does not penetrate, it may mean that the texture of the stone is relatively dense and the water absorption rate is low. Marble is generally coated with a layer of protective agent to prevent stains from penetrating. Even if the customer sees that the ink drop does not penetrate, it is likely that the protective agent is working, not the performance of the stone itself. In addition, if the water on the back of the stone is in the form of water beads, it means that it has been coated with a protective agent and it is difficult to absorb water. It may also cause it to be unable to fit with cement. Therefore, it can be considered that the smaller the water absorption rate of the front of the marble, the better, but it should also be considered whether its back can be well bonded with cement adhesives.
Common test 2: Vinegar reacts with marble to form calcium acetate, so dripping vinegar on marble will cause the surface of the stone to change and become rough, which can show whether it is real marble.
This test makes sense in principle, but because acetic acid itself is weak in acidity, the test requires a long reaction time, and consumers cannot see the results for a while. The effect of using dilute hydrochloric acid is more obvious.
Common test 3: Knock on the marble and listen carefully to the sound. If the sound is crisp, it means that the product quality is very good, the interior is fine and uniform without cracks; if the sound is rough, it proves that there are cracks inside the marble and the texture is loose.
This test can only show that the texture of the stone is relatively hard, brittle and has high strength, and it cannot be used as a standard for judging the quality of the stone, because the sound of the stone has a certain relationship with its own variety and size. This kind of marble with relatively high strength is more suitable for the ground.
Other methods
Relevant people suggest that when consumers choose marble, they should be cautious about using red and brown series of granite and marble. If used, the area of installation should not exceed 40 square meters. Try not to buy marble from "mobile stalls" because many of them are dyed and the hygiene and safety of the paint are problematic. When choosing on site, there are three methods: visual observation, auditory listening, and ink dripping.
Visual observation: Stone with uniform fine-grained structure has a delicate texture and is a good stone; stone with coarse and unequal grain structure has a poor appearance.
Ear listening: The knocking sound of a good quality stone is crisp and pleasant; if there are slight cracks inside the stone or the contact between particles becomes loose due to weathering, the knocking sound is rough and hoarse.
Ink dripping: Drop a small drop of ink on the back of the stone. If the ink quickly disperses and seeps everywhere, it means that the particles inside the stone are loose or there are gaps, and the stone quality is not good; if the ink drops in place, it means that the stone texture is good.
Consumers have the right to ask manufacturers to produce inspection reports when purchasing stone, and should pay attention to the date of the inspection report. The radioactivity of the same type of stone varies greatly due to different mines, ore layers, and origins. Therefore, when selecting or using stone, you cannot just look at one inspection report. Especially when using stone in large quantities in projects, it should be tested multiple times in batches or stages.
